复合材料泄水槽
Composite drain
编辑
edit
在传统材料的基础上逐渐的衍生出新材料的桥梁泄水槽--复合材料泄水槽。桥梁复合材料泄水槽采用高强度复合材料制造，主要材料是玻璃纤维/环氧树脂复合材料，局部以碳纤维材料补强，接口部位采用不锈钢螺钉连接并胶接，同时采用碳纤维编织布胶接补强。
On the basis of traditional materials, a new material of bridge flume composite material flume is gradually derived. The bridge composite material drain channel is made of high-strength composite materials, the main material is glass fiber / epoxy resin composite materials, the local part is reinforced with carbon fiber materials, the interface part is connected with stainless steel screws and glued, and the carbon fiber woven cloth is used for gluing reinforcement.
复合材料泄水槽具有重量轻，强度高，防腐，寿命长的优点。生产中不产生有毒有害物质，使用中老化分解过程不产生有毒有害物质。不包含铅、铬、砷等有毒重金属，不含有石棉、等致癌物。在水的长期浸泡下无溶出物，材料对环境安全。
The composite drain tank has the advantages of light weight, high strength, anti-corrosion and long service life. No toxic and harmful substances are produced in production, and no toxic and harmful substances are produced in the process of aging and decomposition in use. Does not contain lead, chromium, arsenic and other toxic heavy metals, does not contain asbestos, other carcinogens. The material is safe to the environment because there is no dissolved substance after long-term immersion in water.
对操作人员短期的皮肤接触不会引起过敏等短期不良反应，不存在致癌、致畸等长期不良。但是，需要注意的是如需要加工打磨本材料时，要采取必要的防护措施，包括带防尘口罩，穿戴工作服。加工的粉尘可能引起皮肤的不适，工作完毕应洗浴。粉尘吸入后，可能引起呼吸道不适，长期接触可能引起呼吸道疾病。因此特别提醒注意进保定平面设计培训 保定室内设计培训 保定空调移机 保定太阳能维修 保定厨房排烟 雄安管道通风 行打磨、钻孔时应佩戴口罩
Short term skin contact with the operator will not cause short-term adverse reactions such as allergy, and there is no long-term adverse reactions such as carcinogenesis and teratogenesis. However, it should be noted that if the material needs to be processed and polished, necessary protective measures should be taken, including wearing dust masks and work clothes. The dust may cause skin discomfort, so take a bath after work. Dust inhalation may cause respiratory discomfort, and long-term exposure may cause respiratory diseases. Therefore, special attention should be paid to wear masks when grinding and drilling